Joginpally B.R. Engineering College
Joginpally B.R. Engineering College
Few seats in B.Tech. Engineering i.e. EEE, ME, ECE, CSE, INF under SPOT Admissions for the Academic Year 2017-18 eligible and willing candidates can contact on or before 11-08-2017 up to 04:00 PM, Mobile No.9704924777, 9676466680.....
  About JBREC Administration R & D Departments Facilities News Placements Exam Cell Gallery Alumni
 
Overview of the Department
Vision & Mission
PEO's and PO's
HOD details
Faculty details
Infrastructure
Professional Bodies & Voluntary Organization
Research & Development
Faculty Acheivements
Seminars/Workshops Organised
Seminars/Workshops Attended
Student Acheivements
Placement
Toppers
Industrail Visits
photo gallary
Under Graduation
Post Graduation

Mechanical Engineering

Mechanical Engineering department was established in the academic year 2011-12.The department is offering four year B.Tech (Mechanical Engineering) with an intake of 60 students during academic year 2011-12. The intake in U.G Programme was increased from 60 to 120 in the academic year 2012-13. The strength of the department lies with its well qualified and experienced faculty. The faculty is a combination of well academic qualification, enriched teaching experience and vide industrial exposure.  The department is having well equipped laboratories beyond JNTU curriculum, and provides excellent facilities to encourage research. The department organizes various programs like seminars, Guest Lectures, paper presentations, Group Discussion and Industrial Visits to enhance the competencies of our students. The highlight of our department is that it is housed in a separate block that accommodates the basic infrastructure viz. Laboratories, Lecture Halls, Drawing Halls, Seminar Hall and Student development Centre, e-class room

Vision & Mission:

  • To provide quality education and research facilities to the students and enhance their skills making them globally sustainable mechanical engineers

The Mission of the Mechanical Engineering department is:

1. Develop young individuals into knowledgeable, skilful and ethical professionals.
2. Excellence in teaching, research and innovations.
3. Develop Industry-Interaction for innovation and product development.


PEO's and PO'S:

PEOS

PEO 1: Graduate shall have the ability to apply knowledge in emerging areas of Mechanical Engineering and across the disciplines for academic excellence, research, and handle the realistic problems.
PEO 2 : Graduates shall maintain ethical conduct, sense of responsibility to serve the society and protect the environment.
PEO 3: Graduates shall possess soft skills, managerial skills, leadership qualities, knowledge of contemporary issues for successful professional career and higher studies,

Program Outcomes (POs)
  • An ability to apply knowledge of mathematics, science, and engineering.
  • An ability to design and conduct experiments, as well as to analyze and interpret data.
  • An ability to design a system, component, or process to meet desired needs within   realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability.
  • An ability to function on multidisciplinary teams.
  • An ability to identify, formulate, and solve engineering problems.
  • An understanding of professional and ethical responsibility.
  • An ability to communicate effectively.
  1. The broad education necessary to understand the impact of engineering solutions in a  global, economic, environmental, and societal context.
  • A recognition of the need for, and an ability to engage in life-long learning.
  • A knowledge of contemporary issues
  • An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Head of the Department:

Dr. SRIDHARA REDDY obtained B.Tech in Automobile Engineering from Gulbarga University, Karnataka, M.Tech (ICE&GT) from REC, Warangal and PhD from JNTUH, Hyderabad. He is a young & dynamic Technical Person having more than 24 years of teaching and administration experience. He coordinated various R&D projects in the specialization of Mechanical Engineering. He worked as a BOS member, IQAC committee member in various colleges.  He also developed coursework and coordinated in implementing NBA and NAAC Accreditation.
 
Mechnanical HOD
 Dr.Sridhara Reddy
Professor & HOD
B.E,M.Tech,Ph.D,MISTE,MCI(IS)

Honours:

  • Best Paper Award with Cash Prize for a technical paper presented at National Conference–NCNTE-08 held at Fr.Rodrigues Engineering College, Vashi, Navi Mumbai, India.
  • He published 19 International & National reputed Journals & 4 International & National Conference papers.
  • Chair person in many seminars, conferences & workshops organized for both students and Faculty.
  • Working as a Reviewer for journals like Journal of The Institution of Engineers (India), Journal of Thermal Engineering.
  • Worked as Member of Expert committee/ Advisory board for several international conferences / seminars.

Faculty

S.No

Name of the Faculty

Designation

Qualification

Experience in  Years

photo

1

Dr. Sridhara Reddy

HOD & Professor

B.E,M.Tech,Ph.D,MISTE,MCI(IS)

24

2

Mr.A.V.Rao

Professor

B.E,M.E. (Ph.D)

37

3

Mr.M.P.Rama Rao

Professor

B.E,M.E. (Ph.D)

35

4

Mr.D.Govardhan

Associate Professor

B.E,M.E., (Ph.D)

16

5

Mr.K.Ramesh

Associate Professor

B.Tech, M.Tech

16

6

Mr.L.Sreenivasa Rao

Asst.Prof

B.E,M.Tech

15

7

Mr.M.M.MK Varma

Asst.Prof

B.E(AMIME), M.Tech

14

8

Mr.MD.Jamsheed

Asst.Prof

B.E,M.E.

6

9

Mr.M.Ravikumar Goud

Asst.Prof

B.E,M.E.

5

10

Mr.U.Satti Babu

Asst.Prof

B.Tech, M.Tech

3

11

Mr.V.Malla Reddy

Asst.Prof

B.Tech,M.Tech

3

12

Ms.Surekha

Asst.Prof

B.Tech,M.Tech

3

13

Mr.A.Naresh

Asst.Prof

B.Tech,M.Tech

3

14

Mr.Jojappa Dara

Asst.Prof

B.Tech,M.Tech

3

15

Mr. P. Srikanth

Asst.Prof

B.Tech,M.Tech

1

16

Mr.P.Sachin

Asst.Prof

B.Tech,M.Tech

1

17

Mr.V.Madhava

Asst.Prof

B.Tech,M.Tech

1

18

Mr.Ch.Sharath Reddy

Asst.Prof

B.Tech,M.Tech

1

19

Mr.CH.Anilkumar

Asst.Prof

B.Tech,M.Tech

1

20

Mrs.U.Sambhavi

Asst.Prof

B.Tech,M.Tech

1



Supporting Staff

S.No

Name of the Staff

Designation

Qualification

1 Mrs.Deepika Lab Technician B.Tech,(M.Tech)
2 Ms.Renuka Lab Technician B.Tech,(M.Tech)
3 Mr.Rampelli Odelu Lab Technician  B.Tech
4 Mr.K.Narayana Rao Lab Technician I.T.I
5 Mr.B.Narsimhulu Lab Technician I.T.I


Infrastructure:


The department has excellent laboratories, worth of around Rs. 1 Crore to cater to research opportunities and academic syllabus. The students are trained and supervised by experienced coordinators. Through the experiments performed at the labs, the students get practical knowledge. The knowledge acquired in the lab eventually equips the students to provide quality service once Employed in the industry.

List of Labs:

  1. Engineering Workshop
  2. Metallurgy & Mechanics of Solids Lab
  3. Thermodynamics Lab
  4. Kinematics of Machinery Lab
  5. Production Technology Lab
  6. Fluid Mechanics and Hydraulic Machinery Lab
  7. Machine Tools
  8.  Metrology Lab
  9. Thermal Engineering Lab
  10. Heat Transfer Lab
  11. Computer Aided Design and Manufacturing Lab
  12. Instrumentation Lab

1. Engineering Workshop

Engineering Workshop is a place where students acquire knowledge on the operation of various processes involved in manufacturing and production. The Workshop Practice course makes students competent in handling practical work in engineering environment. In this workshop students are enabled in basic mechanical operations like fitting, carpentry, foundry and smithy. The following workshop practices are given to the students. This workshop develops the creative skill of the future engineers

  Mechanical Lab

Mechanical lab  

2. Metallurgy & Mechanics of Solids Lab

The purpose of metallurgy and Mechanics of Solids laboratory is to make students conduct experiments to determine the magnitude of stress and strains acting in a material which can be further used to determine other material properties. In order that students have a good understanding of the theory underlying the experiments


3. Thermodynamics Lab
mechlab

4. Kinematics of Machinery Lab

5. Production Technology Lab

The production technology Laboratory course aims to impart the knowledge about various manufacturing processes. It deals with metal casting, metal forming plastic molding and metal joining processes. After this course, a student will have a good exposure about the manufacturing processes and various operations and machinery. This also gives the recent trends in these processes also.

 

Mechanical lab

Mechanical lab

 

6. Fluid Mechanics and Hydraulic Machinery Lab

The purpose of Fluid Mechanics and Hydraulic Machinery laboratory is to reinforce and enhance the understanding of the fundamental concepts of Fluid mechanics and Hydraulic machines. The experiments here are designed to demonstrate the applications of the basic fluid mechanics principles and to provide a more intuitive and physical understanding of the theory. This lab has ample facilities for conducting fluid flow experiments.


7. Machine Tools Lab

Machine tools are power driven machines used by the mechanical engineers for imparting the desired size and shape to a work piece with the desired accuracy by removing the excess metal in the form of chips. In the machine tool lab, the student performs different operations in the lathe such as taper turning, thread cutting, grooving etc.

 

Mechanical lab

Mechanical lab

 

8.Metrology Lab

The Metrology lab provides the students with an active learning environment of measurement technologies used in production engineering field. 
 The laboratory course covers,various measurements like Linear,  Angular Measurement, Level Measurement, Surface Roughness, etc. Students use the laboratory to collect and analyze measurement data, evaluate measurement methodologies, and learn the capabilities and limitations of measurement technologies.

9.Thermal Engineering Lab

The objective of this laboratory is to provide the student a good environment to understand some very important concepts and applications in the field of IC engines and refrigeration. The primary purpose of the laboratory is to show students the experimental methods on thermal energies on various engines and demonstrate their operational procedures. These values can be further used to determine other fuel properties.

 

Mechanical lab

Mechanical lab

 

10. Heat Transfer Lab

This Lab contributes to the educational process as the students can study free and forced convection in flat surfaces, Fins exchanger etc. Also, they can study the dependence of the heat transmission with the temperature, speed of the fluid and the exchanger geometry. thereby student can link between what they have learned from the theoretical material and what he is doing in the lab

11. Computer Aided Design and Manufacturing Lab

The Computer Aided Design and Manufacturing Laboratory, encompasses designing of geometric and solid modeling, computer graphics and visualization. Topics include Introduction to computer-aided drafting using CAD software and sketching to generate two- and three-dimensional drawings based on the conventions of engineering graphical communication.

 

Mechanical lab

amechanical lab

 

12. Instrumentation Lab

The main aim of this lab is to guide the students in measuring velocity of fluid, Humidity, Fluid Density, Temperature and so on. The lab is equipped with Temperature Measuring Devices, Displacement Measuring Device, Various Strain gauges, Speed measuring Device, etc.. Sensors and Transducers include Pressure Sensors and manometers, Flow meters, LVDTs, Strain Gages, Thermocouples, and RTDs etc



Department Library

Library is the fertile source of information to the engineers. The library is embellished with a good number of volumes of books, journals, periodicals, technical magazines and e-journals. The library is kept open in all working days and also during vacation.

Learning Ambience

  • Materials downloaded from IIT websites are useful for self learning of students.
  • Lab manuals, Hand books and the materials provided by the staff members.
  • Activities related to professional Societies like ISTE.
  • Several centers of Excellence for students to gain knowledge.

 

LIST OF SOFTWARE:

  • AutoCAD Software (AUTODESK)
  • Ansys 17.0
  • Catia V5 

Professional Bodies & Voluntary Organization:


  • Student Chapter of ISTE

Research & Development
[ Top ]

Technical papers published in International/ National Journals/ Conference:

  1. Sridhara Reddy , Maheswar Dutta and K.Vijaya Kumar Reddy, “Effect of compression ratio on Performance of Hydrogen blended CNG- Diesel Dual Fuel Engine”, Journal of Mechanical Engineering, Vol. ME 44, No. 2, December 2014, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh.
  2. Sridhara Reddy and Dr. Maheshwar Dutta, "An Experimental Study on The Effect of Injection Timing And COV on Direct Injected Two Stroke S.I. Engine”, Refereed International Journal, Turkish Journal of Science and Technology (TJST), 2011, vol.6, No.2. pp.87-99.
  3. Sridhara Reddy, Maheswar Dutta, A. Sivakumar, “An Experimental Study on the Effect of Exhaust Gas Recirculation on Operating Parameters of Diesel-CNG Dual Fuel Engine With Hydrogen Addition”,  International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences (IJ-ETA-ETS), JAN ’12 – JUNE ’12, Volume 7 : Issue 1, Pg. 16-22.
  4. Sridhara Reddy, Maheswar Dutta, “Performance and Emission Characteristics of Direct Injection CNG-Diesel Dual Fuel Engine”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) Vol. 8, Issue 5 (Sep. - Oct. 2013), pp 29-37.
  5. Sridhara Reddy, Maheswar Dutta, “A Comparative Evaluation of the Performance and Emission Characteristics of Internal Combustion Engine with Compressed Natural Gas as Alternative Fuel”, International Journal of Emerging Technology and Advanced Engineering (IJETAE), Vol.3, issue 10, October 2013 pp.1-6.
  6. Sridhara Reddy and Dr. D. Maheshwar, “The CNG Injection Strategies for Spark Ignition Engines – A Technical Review”, International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences (IJ-ETA-ETS), Jan ’12 – June ’12, vol.5, Issue.1, pp.199-205.
  7. Sridhara Reddy and Dr.Maheshwar Dutta, “Performance study and Emission Characteristics of a Diesel Engine Using Cotton Seed Oil”, proceedings of National Conference–NCNTE-08, FCRIT-NCNTE-08, pp 24-27, held at Fr.Rodrigues Engineering College, Vashi, Navi Mumbai , India, during 29th Feb. – 01st March 2008, and won BEST PAPER award.
  8. Sridhara Reddy, A. Sivakumar and Maheshwar Dutta, “Performance and Emission Characteristics of CNG operated S.I. Engine”, proceedings of National Conference, NUCONE - 2008 , pp. 545-548, held at  Institute of Technology, NIRMA University of Science and Technology, Ahmedabad, Gujarat, India, during 27th – 29th Nov. 2008.
  9. Sridhara Reddy, A. Sivakumar, G. Gopala Krishna and Dr. Maheshwar Dutta, “The option of Hydrogen addition with CNG - a feasible achievement for S.I. Engines”, proceedings of International Conference on “Emerging Research and Advances in Mechanical Engineering, ERA-2009”, pp. 24-28, held at Velammal Engineering College, Chennai, India, during 19th – 21st  March 2009.
  10. Sridhara Reddy, A. Sivakumar, G. Gopala Krishna and Dr. Maheshwar Dutta, “Compressed Natural Gas Direct Injection (CNGDI)- Valve Timing and Ignition Study”, proceedings of National Conference on Advances in Mechanical Engineering, NCAME, pp. 194-198, held at MCT’s Rajiv Gandhi Institute of Technology, Andheri (W), Mumbai, India, during 15th and 16th January, 2009.
  11. G. Gopala Krishna, Sridhara Reddy and Dr. C. Venkatramana Reddy, “A Millimeter, Micro level Gas Turbine for Power Generation”, Proceedings of the National Conference on Evolving Trends in Mechanical Engineering (ETME-09), pp. 214-221, held at The Oxford College of Engineering, Bangalore, India, during 13 -14th  March 2009.
  12. Dr. M. Ashok Kumar, Sridhara Reddy, and Dr. P Ram Reddy, “Exhaust Emission Analysis for Ceramic Coated Pistons and Liners for Single Cylinder 4-Stroke Diesel Engine”, Proceedings of the National Conference on Excellence in New Technologies in Mechanical Engineering, ENTIME, pp. 89- 94, held at Malla Reddy Engineering College, Secunderabad, India, during 12- 13th December 2009.
  13. G. Gopala Krishna, Dr. P. Ram Reddy, Dr. M.Mazoor Hussain, Sridhara Reddy, “Evaluation of Parameters of Friction Stir Welding for Aluminum AA 6061 Alloy”, Proceedings of the National Conference on Excellence in New Technologies in Mechanical Engineering, ENTIME, pp. 164-168, held at Malla Reddy Engineering College, Secunderabad, India, during 12- 13th December 2009.
  14. A. Sivakumar, Dr. D Maheswar, Dr. K. Vijaya Kumar Reddy and Sridhara Reddy, “Investigation on Performance and Exhaust Emission for Different Compression Ratios of LHR Extended Expansion Engine”, International Journal of Advanced Engineering Sciences and Technologies, Vol. 11, Issue.1 Pg. 132- 137.
  15. Sridhara Reddy and Dr.Maheshwar Dutta “Performance and emission comparison of a retrofitted spark ignition scooter engine fuelled with gasoline and CNG", National Conference on Recent Advances in Mechanical Mechanical Engineering and its impact on Indian Industries (RAMEIII-2012) held on 20th - 22nd September, 2012, Organized by Mechanical Engineering Department, PDA College of Engineering, Gulbarga, pg. 219-227.
  16. B.Ramya, Sridhara Reddy, Dr. C. Udaya Kiran, “Design and structural analysis of Chassis”, International Journal of Engineering Development and Research (IJEDR), Vol.2, Issue.4, pp.3584-3589.
  17. G. Vamshi Yadav, Dr. Sridhara Reddy, Dr. Udaya Kiran, “ Design of Bellows for Valve Operating System for Internal Combustion Engines”, International Journal of Mechanical Engineering & Advance Automotive Combustion Engines, Vol.03, Issue.01, October 2015, Pg 3420-3425.
  18. Cingaram Kushal Chary, Dr. Sridhara Reddy, “Design and Analysis of Helical Compression Spring of IC Engine”, International Advanced Research Journal in Science, Engineering and Technology, Vol.3, Issue.10, Oct. 2016. Pg.153-155.
  19. Dr.Sridhara Reddy, Dr. D. Maheswar, Dr. K. Vijaya Kumar Reddy, “Investigation into effect of injection pressure on performance characteristics of diesel -CNG dual fuel engine” in press for Journal of The Institution of Engineers (India): Series C. Springer Publications (Paper ID-IEIC-D-16-00003R1)
  20. V. Mallikarjuna, L. Sreenivasa Rao, K. Ravi Shankar; “Modification of Hydraulic Circuit of H-400 Gear Hobbing Machine”, International Journal of Engineering Technology Science and Research (IJETSR) ;Vol:03 Issue:2,February 2016,pp1– 15, ISSN 2394 – 3386.
  21. V.Mallikarjuna, K.Rajesh, K.Ramesh, and   B.Rama Bhupal Reddy  ,  paper published on “Modelling & Optimization of shape of a Heat sink fins on mother board”  in  the    International “Journal  of  Computer  &  Mathematical sciences”  , vol.6(5), p.228-251,May 2015.
  22. K.Ramesh Attended  National Conference on  “Advancements  and Innovations  in Engineering, Technology & Management “, and presented paper on “Multipurpose Robot” Conducted by Joginpally B.R.Engineering College held on 4 & 5th Sep, 2015.
  23. U Pranavi, Perumalla Janaki Ramulu, Ch Chandramouli, Dasari.Govardhan, PVS.Ram Prasad “Formability analysis of aluminum alloys through deep drawing process IOP Science Conf. Series: Materials Science and Engineering 149 (2016) 012025 doi:10.1088/1757-899X/149/1/012025
  24. P  Venkateshwar  Reddy,  Perumalla  Janaki  Ramulu,  G  Sandhya  Madhuri,Dasari.Govardhan, PVS Ram Prasad “Design and Analysis of Deep Drawing Process on angular Deep Drawing Dies for Different Anisotropic Materials”, IOP Science Conf. Series: Materials Science and Engineering 149 (2016) 012142 doi:10.1088/1757-899X/149/1/012142.
  25. D. Govardhan and S. Rao “Behavior of turbulence models in low Reynolds number flows and near wall regions”, EPSRC, UK Fluids Conference, Imperial College London, University of Leeds, September’2016.
  26. Dasari.Govardhan, Dr.Arkanti Krishnaiah and Dr.AVSSKS Gupta, “Computational Fluid Dynamics Investigation of Convective Heat Transfer in Fluid Flows in Micro Channels”, accepted for publication by the ICAMM-2016 organized by Dept. of Mechanical Engg., UCE, OU.
  27. Dasari Govardhan, Perumalla Janaki Ramulu, Pvs Ram Prasad and NRR Anbusagar, “Hydrodynamics of a Fish using Fluid Structure Interaction”,accepted for publication by the ICAMM-2016 organized by Dept. of Mechanical Engg., UCE, OU.
  28. Pvs Ram Prasad, Perumalla Janaki Ramulu, Dasari Govardhan and NRR Anbusagar, “Dynamic Computational Resource Management Technique for Solving Engineering Problem”, accepted for publication by the ICAMM-2016 organized by Dept. of Mechanical Engg., UCE, OU.
  29. Gopal,M M M K VARMA,l Suresh Kumar ,” Thermal and Structural analysis of an Exhaust Manifold of a Multi Cylinder Engine” IJMET, Dec 2014.
  30. Gopal,M M M K VARMA,l Suresh Kumar,” Exhaust Manifold Design-FEA Approach” IJETI, Nov 2014.
  31. MOHAMMED JAMSHEED, “Design and Analysis of Plastic Injection Mould for CAM BUSH with Submarine Gate”. (ICMPC 2015).

[ Top ]


Faculty Achievements

  • Dr. Sridhara Reddy Worked as convener for one week workshop on, “Emerging trends in CAD/CAM Technologies”, Organised by dept. of Mechanical Engineering, J.B.R.E.C., Yenkaplly Hydereabad, during 9th to 14th Dec. ’16.
  • Dr. Sridhara Reddy delivered expert lecture on, “Recent development in IC engines and their fuels”, and presided the inaugural session of state level technical symposium ARGHYA-14, organized by Mechanical Engineering Department, MBE Society’s College of Engineering, Ambejogai, Maharashtra during 7th -8th 2014.
  • Dr. Sridhara Reddy delivered guest lectures on, “Automobile Engineering” and “Applied Thermodynamics” on 15th and 16th Feb 2015 at Sree Dattha School of Engineering, Sheriguda, Hyderabad.
Seminars/Workshops Organised

Seminars , Workshops & Industrial Visits Organised By Faculty

  • A  Faculty Development Programme on “Engineering Mechanics” was organised during May 8h-12th ,2017 at  Department of Mechanical Engineering, JBREC .
  • A one week Workshop on “INTEGRATION OF   CAD/CAM &  ITS BENEFITS”  was organised during 9th -14th December,2016 at  Department of Mechanical Engineering, JBREC .
  • A  Faculty Development Programme on “Engineering Drawing” was organised during June 20th-24th ,2016 at  Department of Mechanical Engineering, JBREC .
  • Inauguration of ‘ISTE Student Chapter’ on 30-07-2015
  • A Two day Faculty Development Programme on ‘Engineering Drawing’ was organised and conducted by the Department of Mechanical Engineering on 2nd and 3rd January 2015
  • Conducted a One Day ‘Automobile Workshop’ with a Caption ‘GREASY HANDS’ to provide students the hands one experience on 05-10-2013 jointly organised by Mechanical Engineering Department and M/s Stimulus
  • Organised and conducted a Two Week ISTE Workshop on ‘Engineering Mechanics’ under the National Mission on Education through ICT (MHRD, Govt.of India) from 26th November to 6th December, 2013, conducted by Indian Institute of Technology Bombay.
  • The first batch (2011-15) students had been to ‘HMT Machine Tools Ltd – Praga Division – Hyderabad” on 27-09-2013 as a part of Industrial Visit to get firsthand Knowledge of Machine Tools
  • Organized and conducted a One Day Workshop on’ Fundamental Concepts of Forces and Relative Motions of Members’ on 22-08-2013 by Guest Speaker Dr.G.Satish Babu, Prof. in Mechanical Engineering, JNTUH, Hyderabad
  • Conducted a seminar on the topic ‘CAREER OPPORTUNITIES FOR MECHANICAL ENGINEERING STUDENTS’for a mechanical Engineering students on 14-08-2013
  • Organized and conducted for the first time a National Level Techno-Cultural Fest 2013, ‘ME-XTREME- Yagnadhruva” March 20th and 21st 2013
  • Conducted a series of seminars on the topic ‘TIME EFFECTIVE TIPS TO ENHANCE STUDENT PERFORMANCE’for all the First Year Students, it was initiated to motivate the students to enhance their performance in the month of February 2013.
  • Organized and conducted the First Fresher’s Day of the department of mechanical Engineering on 05-01-2013.
  • Organised and conducted a Two Week ISTE Workshop on ‘Engineering Thermodynamics’ under the National Mission on Education through ICT (MHRD, Govt.of India) from 11th to 21st December, 2012, conducted by Indian Institute of Technology Bombay.
  • Organised and conducted one week workshop on, “Emerging trends in CAD/CAM Technologies”, Organised by dept. of Mechanical Engineering, J.B.R.E.C., Yenkaplly Hydereabad, during 9th to 14th Dec. ’16

Govardhan.Dasari

  • Acted as Department Co-ordinator for National Technical festival “NITSION-2013” organized by Nalgonda Institute of Technology & Science, Cherlapally. Nalgonda Dist.
  • A One -Day Work shop on “Maintenance of Bearings” Organized by “SKF Bearings Ltd”, on 05-04-2002.
  • A One -Day Work shop on “Maintenance of Gears” Organized by “Crompton Greaves”, Chennai, on 10-08-2002.
  • A One -Day Work shop on “Maintenance of Crushers” Organized by “Puzzolona
  • Machinery Pvt. Ltd, Hyderabad, from 14-12-2002.
  • A One -Day Work shop on “Maintenance of Ball Mills” Organized by “FLSmidth Pvt. Ltd”, Chennai, from 26-08-2003
Seminars/Workshops Attended

Seminars ,Workshops& Faculty Development Programmes Attended By Faculty

Dr. Sridhara Reddy

  • Participated and attended two day workshop on, “Recent Development in Mechnaical Engineering”, organized by Department of Mechanical Engineering, MallaReddy Engineering College, during 12th -13th 2011.
  • Attended one day National Workshop on “Advanced trends in IC engines an combustion” on 28th February 2013 organized by the Dept. of Mechanical Engineering, JNTUH College of Engineering, Kukatpally, Hyderabad.
  • Attended a two day Faculty Development Programme in Effective Teaching Methodology, conducted by ISTE on 19th & 20th Oct. 2013 held at JBIET, Hyderabad.
  • Attended and presented a paper in the National Conference on “Recent Advances in Mechanical Engineering & Their Impact on Indian Industries” (RAMEIII-2012) held during 20th - 22nd Sept. 2012, organized by the Dept. of Mechanical Engineering, HKES’s PDA College of Engineering, Gulbarga, Karnataka, sponsored by Technical Education Quality Improvement Programme (TEQIP).
  • Participated in faculty development on “Design Aspects of Mechanical & Aerospace Engineering”, Jointly organized by Mechanical and Aeronautical Engineering of MRCET and CMEC during 2nd July – 10th July 2009.
  • Attended and presented a paper in International Conference on “Emerging Research and Advances in Mechanical Engineering, ERA-2009”, held at Velammal Engineering College, Chennai, India, during 19th – 21st March 2009.
  • Attended “Two day National Work shop on Hydrogen & Hydrogen Fuel Cell Technology”, held at Jawaharlal Nehru Technological University, Hyderabad during 23rd - 24th Dec. 2008.
  • Attended, “International Conference & XX National Conference on I.C.Engines and Combustion (ICONICE- 2007)”, organized by Faculty of Mechanical Engineering Jawaharlal Nehru Technological University, Hyderabad and the Combustion Institute (Indian Section), during 6- 9th Dec 2007.
  • Attended Refresher Course on “Solar Energy Applications”, held at Osmania University, College of Engineering, Hyderabad by Centre for Energy Technology, Osmania University, Hyderabad on 28th March 2006 under Technical Education Improvement Programme (TEQIP).
  • Participated in Two day Faculty Development Program on “Effective Teaching Methodology”, conducted by ISTE, AP Section & JB Institute of Engineering and Technology during 19th -20th 2012.
  • Attended one day Faculty Development Programme on, “Geometric Dimensioning and Tolerencing – Impact of Quality Product & Processes in Manufacturing” conducted by Mechanical Engineering Dept, JBIET, on 13th Dec 2013.
  • Participated in Two week ISTE Workshop on “Fluid Mechanics” conducted by IIT, Kharagpur from 20th to 30th 2014, held under the National Mission on Education through ICT (MHRD) at National Institute of Technology, Warangal.
  • Participated in Three day Faculty Development Programme on, “Research Trends and Issues in Mechanical Engineering” Under TEQUIP-II S.C. -1.1 during 25th – 27th Feb. 2016. Organized by Dept. of Mechanical Engineering Dept, Mallareddy Engineering College (Autonomous), Secunderabad.

Govardhan.Dasari

  • Attended National Conference on Recent Advances in Fluid Mechanics Organized by Prof. B. Shankar, Dept. of Mathematics, UCS, O.U. May’2016.
  • Attended Workshop on Outcome Based Education and Accreditation conducted by JNTUH

Students Achievements
Students - Sports & Games

  • Ms B.Anitha,Roll No 13J21A0307 of  II year Mechanical branch is an NCC Cadet of Regimental No:AP SW/14/128052 has attended ANNUAL TRAINING CAMP-IV (LIDC) at BJG,SECUNDRABAD from 7th -16th  August 2014and was awarded a GOLD MEDAL for best senior cadet
  • Mr.Venkata Ratnam, Roll No 11J21A0312 of  IV year Mechanical branch has secured second place in WEIGHT LIFTING COMPIONSHIP(85 Kgs Category) held at Gandhi Bhavan. Hyderabad from 15th -18th  August 2014


Placement:

Student Placement-2015-2016

Roll Number

Student Name

Department

Company Name

12J21A0363

Mekala Ganga Prasad

Mechanical

Alpha 9 Marine Services

12J21A0399

Velagala Surendra Reddy

Mechanical

Alpha 9 Marine Services

13J25A0301

Devanoori Phanindra

Mechanical

Alpha 9 Marine Services

12J21A0389

Sidrala sravan kumar

Mechanical

Alpha 9 Marine Services

12J21A0355

M Sai Kireeti

Mechanical

Alpha 9 Marine Services

12J21A0340

K Parmesh

Mechanical

Alpha 9 Marine Services

12J21A0302

ADE GAJANAN SRIPAD

Mechanical

DE DIETRICH

12J21A0325

DONEPUDI SAI PRAKASH

Mechanical

DE DIETRICH

11J21A0332

M.Madhurima

Mechanical

e-Touch Systems

11J21A0342

S Akhil Kumar

Mechanical

Value Labs

11J21A0341

Kanaka Raju

Mechanical

Value Labs


Toppers :

STUDENT-TOPPERS:  2015-2019 BATCH


YEAR

NAME OF THE STUDENT

ROLL NO

PERCENTAGE

B.TECH –I YEAR

K.Sriniasa Reddy

15J21A0334

72.6

II YEAR -SEM

M.Veera venkat

15J21A0343

70.5

II YEAR-II SEM

N S swetha Emmidi

15J21A0344

79.3

STUDENT-TOPPERS:  2014-2018 BATCH


YEAR

NAME OF THE STUDENT

ROLL NO

PERCENTAGE

B.TECH –I YEAR

R.BALAIAH

14J21A0359

78.40 %

II YEAR -SEM

R.BALAIAH

14J21A0359

70.00 %

II YEAR-II SEM

R.BALAIAH

14J21A0359

72.10 %

III YEAR-I SEM

R.BALAIAH

14J21A0359

73.15 %

III YEAR-II SEM

G.VAMSI

14J21A0323

74.66%

STUDENT-TOPPERS:  2013-2017 BATCH


YEAR

NAME OF THE STUDENT

ROLL NO

PERCENTAGE

B.TECH –I YEAR

B.SRAVAN KUMAR

13J21A0311

82.10 %

II YEAR -SEM

B.SRAVAN KUMAR

13J21A0311

77.24 %

II YEAR-II SEM

B.SRAVAN KUMAR

13J21A0311

77.30 %

III YEAR-I SEM

B.SRAVAN KUMAR

13J21A0311

74.80 %

III YEAR-II SEM

B.SRAVAN KUMAR

13J21A0311

79.80 %

IV YEAR-I SEM

P.BHARATH SIMHA REDDY

13J21A0363

79.10 %

IV YEAR—II SEM

B.AMITHA

13J21A0307

85.10 %

OVERALL TOPPER     : B.SRAVAN KUMAR -     13J21A0311 -  80.17  %

STUDENT-TOPPERS:  2012-2016 BATCH


YEAR

NAME OF THE STUDENT

ROLL NO

PERCENTAGE

B.TECH –I YEAR

S.SRAVAN KUMAR

12J21A0389

89.25 %

II YEAR -SEM

D.SAINATH

12J21A0324

84.25 %

II YEAR-II SEM

D.SAINATH

12J21A0353

86.15 %

III YEAR-I SEM

D.SAINATH

12J21A0324

86.01 %

III YEAR-II SEM

V.RAJSHEKAR

12J21A0396

82.13 %

IV YEAR-I SEM

G.MABU SHAREEF

12J21A0334

82.10 %

IV YEAR—II SEM

D.SAINATH

12J21A0324

85.10 %

OVERALL TOPPER     : D.SAINATH-     12J21A0324 -     85.14 %

student achievements

INDUSTRIAL VISIT:

  • Industrial Visit to “RANE Engine Valves , HYDERABAD on 10-04-2017.
  • Industrial Visit to “BHEL” Ramachandrapuram, HYDERABAD on 27-07-2016.
  • Industrial Visit to “Annapurna Foils , HYDERABAD on 20-08-2015
  • Industrial Visit to “BHEL” Ramachandrapuram, HYDERABAD on 10-04-2015
  • Industrial Visit to “ACER MOTORS” Kushaiguda, HYDERABAD on 07-03-2014
  • The first batch (2011-15) students had been to ‘HMT Machine Tools Ltd – Praga Division – Hyderabad” on 27-09-2013
Photo Gallery:

Project Exhibition –March 2017